Electronic control unit programming

1. EGR system repair / programming‍

Modern diesel engines are almost always equipped with an EGR system.

The exhaust gas recirculation system (Exhaust Gas Recirculation- EGR) of automobile engines is used to reduce the release of harmful emissions into the atmosphere. The EGR system, which is a valve that connects the throttle chamber of the intake manifold with the exhaust system in different operating modes, injects the exhaust gases back into the engine. Some exhaust gas enters the cylinders when the EGR valve is open, which causes the peak temperature to drop, resulting in lower high-temperature emissions.

In our service, it is possible to diagnose the EGR system problem, carry out professional cleaning and/or replacement of the EGR valve, we will provide cleaning/washing of the EGR radiator in an ultrasonic bath, if necessary, we will provide EGR disconnection/programming.

2. AdBlue system repair/programming‍

The AdBlue system is designed for diesel engines to reduce harmful emissions into the atmosphere. Since the end of 2015, all modern diesel cars (Euro 6) must use AdBlue, a liquid that reduces the amount of nitrogen oxides in the exhaust gases. AdBlue, also known as Diesel Exhaust Fluid (DEF), is colorless, non-toxic and will need to be topped up from time to time. A notification will appear on the instrument panel that the fluid in your car needs to be topped up.

The most common problems with the AdBlue system:

1. The level of AdBlue liquid is too low, it needs to be topped up.

2. Additive quality of the AdBlue system - it is important that the AdBlue liquid meets the specifications of your engine as specified by the manufacturer. Using low-quality AdBlue can cause engine malfunctions.

3. AdBlue system pump or heating element is damaged.

4. Damage to the pressure sensors of the AdBlue system.

In our service, it is possible to diagnose the problem of the AdBlue system, carry out system repair, change the necessary parts, and if necessary, we will provide high-quality unlocking / programming of the AdBlue system.

3. CHIP-TUNING - increasing car power‍

Chiptuning is the correction of the software of the engine control unit in order to improve or adapt it to certain needs. In the process, several parameters of the engine are adjusted (for example: fuel injection amount, ignition timing, turbocharger pressure, etc.)

Our service will provide the best solution for a specific car model to make your car more responsive and sporty for everyday use. To find out the chiptuning power increase for a specific car model and the cost, contact us.

Our services

Choose the service you need

Car diagnostics
In order for a service technician to be able to perform correct and high-quality car repairs, it is necessary to perform initial diagnostics. When purchasing a car, we recommend to perform a full car diagnostic
Air conditioner recharge
We carry out defects, recharge and repair of the air conditioner system.
Engine repair
We perform a full range of engine repair and maintenance according to the standards set by the manufacturer
Transmission repair
We repair and maintain manual, automatic and robotic gearboxes according to the standards set by the manufacturer. We offer our customer to install new / refurbished flywheels and clutch kits
Running gear repair

We perform repair of running gear, brake system and car damping. We offer our customer to install new / refurbished steering equipment
Exhaust system repair
Soot filter (DPF) washing
Professional cleaning of soot filters (DPF) / catalysts, replacement or repair of EGR valves
Intake system repair
Cleaning of intake manifold and engine head intake ducts
Wheel alignment
We carry out wheel alignment check andadjustment or toe / camber / caster check and adjustment
Tire mounting / balancing
We carry out tire mounting, balancing and, if necessary, we can store your car's tires until the next tire change season.
Fuel system repair

We perform fuel system diagnostics / repair. Repair / replacement of diesel fuel nozzles and high-pressure pumps
Electronic control unit (ECU) programming
We perform car engine EGR and AdBlue system repairs and programming, as well as ChipTuning - increasing car power

Who are we?

SIA PRORING Latvia was founded on November 13, 2013. The company activities are divided into two main areas:

Car service
Production


The mission of car service is to perform quality car repairs according to the standards set out by the manufacturers.

Production workshop is divided into several departments:
Metalworking department - turning / milling / welding / balancing and construction
Industrial washing department -
high pressure and ultrasonic washing
Refurbishment Department -
flywheel and clutch refurbishment | refurbishment of steering equipment | engine block, head diagnostics and repair

In 2018, we have implemented modernization measures to reduce the amount of hazardous substances used. The measures are implemented with the help and support of the Baltic Environmental Forum from the project "Baltic Pilot Measures to Reduce Emissions of Hazardous Chemicals through Substitution and Resource Efficiency" (LIFE14 ENV / LV / 000174), co-financed by the European Union LIFE Program and Latvian Environmental Protection Fund administration.

Contacts

Service address:
Latgales iela 349, Rīga, LV-1063
Working hours
Monday - Friday - 8:00 - 18:00
Saturday - Closed
Sunday - Closed
Scroll to top