Engine repair

We perform overhauls of engines, which include disassembly and defecting of the engine, procurement of necessary spare parts, inspection / repair of the engine block and head and assembly according to the standards specified by the manufacturer.

Often, the cost of overhauling an engine makes you think about buying another used engine, which also means taking some risks. In cooperation with partners, we supply used engines from all over Europe.

What most often leads to engine overhaul:

·        No car maintenance has been performed according to the standards specified by the manufacturer

·        Improper repairs to the engine or any other unit that affects engine performance have been done in the past

·        In case of timing belt / drive chain defect

·        Prolonged engine overload

·        Natural wear and tear, depleted engine resource

Turbine replacement / repair / renewal


When finding a defect with a turbine, we offer customers three repair solutions:
·        Install a new turbine
·        Install an industrially refurbished turbine
·        Renovate / restore an existing turbine

The first option is always much more expensive, the cost of a new turbine usually ranges from 800.00 - 2500.00 EUR.

The second and third options are very similar in terms of costs 250.00 - 500.00 EUR, by installing an industrially refurbished turbine we are able to save time, we choose the third option when it is not possible to buy the second option.

Turbine disassembly / assembly for each car is very different, as well as cost. When replacing the turbine, it is absolutely necessary to wash lubrication pipes, cooler (intercooler) and coolant pipes with the ultrasonic method in order to clean all these elements from foreign bodies / burns and oils. If the turbine heavily pushes oil into exhaust system, the condition of the catalyst and / or soot filter (DPF) must be checked and, if necessary, washed.

When all these items have been executed, the engine air filter / oil filter and oil must be changed.

Replacement of chain set


Manufacturer has determined replacement interval or resource of chain set for each engine.
Average interval of replacement of chain set is 200,000 km.

We offer replacement of chain set on diesel or gasoline vehicles of all brands, however, most recently we work with BMW 2.0D and 3.0D (M47,N47, M57, N57) engines or AUDI and VW 3.0D and 4.2D engines.

First symptoms that the limit of engine chains has been reached:
• rattling sound upon starting the engine;
• rattling sound of running warm engine;
• uneven engine running.

Such cases warn of damaged chain slide-blocks, chain tensioners, and worn gearwheels or stretched chains.
Failure to eliminate engine problem of such kind at the right time may result in broken engine chain, which means extensive engine repairs.

This procedure varies between engines; special tools are required to correctly adjust all the gearwheels and chains according to marks. 

It is important to properly wash and degrease all the removed parts, engine covers, valve cover and crank case.
During this repair, we wash all of these parts in ultrasound bath.

Upon commencement of this work, it is important to supply and replace all the required parts. Various incomplete chain sets are available on the spare part market, for example, sets without gearwheels, but extensive wear of gearwheels are faced with various engines.
It is necessary to obtain all the necessary gaskets and seals to avoid oil leaks after the repair.

When all the necessary components are replaced, the engine is repeatedly rotated towards the running direction for the technician to be able to repeatedly see that all the gearwheels and chains are in their correct positions.

Last stage of repair / maintenance is replacement of engine oil and filters.

Costs of replacement of a chain set depends on the vehicle model and manufacturers’ prices of the parts used.
In order to find out costs of replacement of a chain set on your vehicle, please contact us and we will prepare a detailed offer.

Replacement of timing belt set


Manufacturer has determined replacement interval or resource of timing belt set for each engine.
Each manufacturer determines these intervals individually, and they can be anywhere from 80,000 km to 220,000 km.

We offer replacement of timing belt set on diesel or gasoline vehicles of all brands.

It is also important to replace all the included rolls and tensioning mechanisms, as well as cooling pump when performing this procedure, since it is driven by timing belt.

Costs of replacement of timing belt set depend on the vehicle model and manufacturers’ prices of the parts used.
In order to find out costs of replacement of timing belt set of your vehicle, please contact us and we will prepare a detailed offer.

Our services

Choose the service you need

Car diagnostics
In order for a service technician to be able to perform correct and high-quality car repairs, it is necessary to perform initial diagnostics. When purchasing a car, we recommend to perform a full car diagnostic
Air conditioner recharge
We carry out defects, recharge and repair of the air conditioner system.
Engine repair
We perform a full range of engine repair and maintenance according to the standards set by the manufacturer
Transmission repair
We repair and maintain manual, automatic and robotic gearboxes according to the standards set by the manufacturer. We offer our customer to install new / refurbished flywheels and clutch kits
Running gear repair

We perform repair of running gear, brake system and car damping. We offer our customer to install new / refurbished steering equipment
Exhaust system repair
Soot filter (DPF) washing
Professional cleaning of soot filters (DPF) / catalysts, replacement or repair of EGR valves
Intake system repair
Cleaning of intake manifold and engine head intake ducts
Wheel alignment
We carry out wheel alignment check andadjustment or toe / camber / caster check and adjustment
Tire mounting / balancing
We carry out tire mounting, balancing and, if necessary, we can store your car's tires until the next tire change season.
Fuel system repair

We perform fuel system diagnostics / repair. Repair / replacement of diesel fuel nozzles and high-pressure pumps
Electronic control unit (ECU) programming
We perform car engine EGR and AdBlue system repairs and programming, as well as ChipTuning - increasing car power

Who are we?

SIA PRORING Latvia was founded on November 13, 2013. The company activities are divided into two main areas:

Car service
Production


The mission of car service is to perform quality car repairs according to the standards set out by the manufacturers.

Production workshop is divided into several departments:
Metalworking department - turning / milling / welding / balancing and construction
Industrial washing department -
high pressure and ultrasonic washing
Refurbishment Department -
flywheel and clutch refurbishment | refurbishment of steering equipment | engine block, head diagnostics and repair

In 2018, we have implemented modernization measures to reduce the amount of hazardous substances used. The measures are implemented with the help and support of the Baltic Environmental Forum from the project "Baltic Pilot Measures to Reduce Emissions of Hazardous Chemicals through Substitution and Resource Efficiency" (LIFE14 ENV / LV / 000174), co-financed by the European Union LIFE Program and Latvian Environmental Protection Fund administration.

Contacts

Service address:
Latgales iela 349, Rīga, LV-1063
Working hours
Monday - Friday - 8:00 - 18:00
Saturday - Closed
Sunday - Closed
Scroll to top